EnkoClean Tool Cleaner
Thorough cleaning of tools, machinery and equipment
Product information
EnkoClean Tool Cleaner is a powerful solvent blend designed to thoroughly remove bitumen, greases, waxes and many synthetic resins. It is ideal for cleaning tools with surfaces that are not sensitive to solvents – it is reliable, leaves no residue and has a mild odour. The clear formulation ensures effective cleaning after use and extends the service life of tools in daily use.
Technical Specifications
| State of matter | Liquid |
| Colour | Colourless |
| Odour | Mild, technically neutral |
| Density (20 °C) | approx. 0.87 g/cm³ |
| Viscosity (at 20 °C) | approx. 0.9 mPa·s |
| Flash point | > 60 °C |
| Application temperature | +5 °C to +35 °C |
| Boiling range | 165–180 °C |
| Water solubility | Immiscible |
| Shelf life | At least 6 months (sealed, max. +25 °C) |
Reliable in use:
High-performance tool cleaner for construction sites, workshops and production facilities
EnkoClean tool cleaner offers powerful cleaning performance whilst being highly compatible with materials. The clear, solvent-based formulation removes even stubborn residues quickly and thoroughly – without any aggressive additives.
Key benefits at a glance:
- Dissolves bitumen, greases, waxes and many synthetic resins.
Ideal for use after applying Enkopur®, Enke primers or Enke-Contact. - Residue-free cleaning –
no resin build-up, no greasy film, no drying marks. - Gentle on materials with solvent-resistant surfaces
Suitable for tools made of metal, plastic or other resistant materials. - Low odour
Pleasant to use – even with frequent use. - Easy to use: Can be applied
directly or by dipping – as required.
EnkoClean is a solvent-based tool and surface cleaner designed to remove fresh, uncured residues of Enke products. It is particularly suitable for cleaning tools, rollers, brushes, spatulas and surfaces that are not sensitive to solvents. EnkoClean reliably softens and dissolves bitumen, greases, waxes and many synthetic resins.
No. EnkoClean tool cleaner is not a paint stripper. It cannot be used to remove liquid plastics or Coats that have already cured. In such cases, mechanical cleaning (e.g. scraping, sanding) is required. EnkoClean tool cleaner must only be used during or immediately after application.
The EnkoClean tool cleaner must only be used on solvent-resistant surfaces.
It is not suitable for:
- delicate plastics
- painted or coated surfaces that are not solvent-resistant
- Styrofoam, EPS/XPS or soft plastics
If in doubt, a material compatibility test should be carried out beforehand.
To use, simply:
- Applying it to a clean cloth or rag
- then wiping down the soiled tools or surfaces
Tools should then be wiped dry. EnkoClean tool cleaner is not intended for diluting other products, but solely for cleaning purposes.
The EnkoClean tool cleaner is:
- flammable
- harmful if swallowed (risk of aspiration)
- irritating to the respiratory tract
- significantly hazardous to water (WGK 2)
The following are required:
- Use only outdoors or in a well-ventilated area
- Protective gloves and eye protection
- Keep away from sources of ignition
- Do not allow to enter the sewerage system or watercourses
The instructions in the safety data sheet must be strictly observed.
Any questions?
We’re always happy to help!
Anyone working with liquid plastics has to consider many details – but uncertainty is not one of them. Because at Enke, we not only provide the right system, but also expert support. Whether you need technical advice, project consultancy or help with a specific application – we’re here for you, we think alongside you and we’re here to help. Direct, reliable and solution-focused.
You can reach us by phone or email:
+49 (0) 2173 8956840
technik@enke-werk.de