Arctic Seal
Emergency sealing in all weathers.
Product information
Arctic Seal is the reliable emergency solution for leaks, even in frosty conditions and on damp substrates. Developed for use in extreme weather conditions, this fibre-reinforced single-component liquid plastic ensures a secure and rapid emergency sealing on a wide variety of substrates. Soivent free, easy to apply and rainproof shortly after application: Arctic Seal lays the foundation for a permanent repair at a later date.
Technical Specifications
| Basis | PUR prepolymers |
| Density | approx. 1.27 g/cm³ |
| Application | Cold application using a brush, trowel or spatula |
| Skin-forming time | approx. 1 hour at 20 °C / 60 % relative humidity |
| Consistency | Paste-like, fibre-reinforced |
| Coverage | approx. 1.5–3.0 kg/m² |
| Colour | Grey, black |
| delivery form | 3.6 kg tin, 330 g cartridge (grey) |
Recommendation for permanent waterproofing using Arctic Seal:
Zero-emission waterproofing with Enkolan® – a soivent free liquid plastic for flat roofs, balconies and sensitive indoor areas. Seamless, weather-resistant, ETA-certified.
A reliable liquid plastic for waterproofing roof surfaces, balconies and terraces – seamless, weather-resistant and vapour-permeable. Now available in silver-grey and black.
Reliable (emergency) waterproofing:
Even if the weather isn’t on our side.
Arctic Seal offers exactly what matters most in emergency repairs: quick application, immediate protection and maximum reliability – even in cold and damp conditions. The material is easy to apply straight from the container or cartridge and provides seamless protection until a permanent repair can be carried out.
Advantages of Arctic Seal at a glance:
- Can be used at temperatures below 0 °C – fully workable even in frost
- Can also be applied to slightly damp substrates – no waiting time for drying
- Easy to apply with a brush, trowel or spatula – straight from the container or cartridge
- Seamless, highly elastic and vapour-permeable – adapts flexibly to any surface
- Quickly becomes rainfast – provides reliable protection shortly after application
- Soivent free and single-component – no mixing required, no emissions
- Weather-resistant and abrasion-resistant – also suitable for heavily used areas
- Available in cartridges or containers – ideal for spot repairs or larger emergency sealing jobs
In a nutshell: Arctic Seal is the quick solution when there’s no time to wait – safe, flexible and ready for use at any time.
Arctic Seal is a temporary emergency sealing solution for urgent repairs where a standard waterproofing installation is not possible due to weather conditions or time constraints.
It is designed to immediately prevent further damage and buy time until a permanent waterproofing system with a geotextile membrane (e.g. Enkolan waterproofing, Enkopur, Enkryl) can be installed.
Important:
Arctic Seal is not a permanent waterproofing solution in accordance with industry standards and is not intended as a permanent solution.
Arctic Seal can be applied even at temperatures below 0 °C, provided the substrate is free of snow and ice.
A slight degree of surface moisture is permissible and does not affect adhesion.
Depending on the temperature and humidity, the material forms a skin very quickly and is therefore soon rainproof – even light drizzle shortly after application is not a problem.
Arctic Seal adheres to most substrates found on site, including:
- Concrete and screed
- bituminous roof surfaces
- Membrane and metal roofs
- joints, penetrations, gutters and water transition zones
Surfaces without a slope where water stands are also acceptable.
Loose, flaking or brittle material must be removed before application; smooth surfaces must be roughened.
The product is applied cold using a brush, trowel or spatula.
Due to the fibre reinforcement, air pockets or raised fibres may occur if the application is not carried out carefully – these must be smoothed out during application to achieve a seamless surface.
Coverage is approximately 1.5–3.0 kg/m², although this may be higher on heavily textured substrates.
Arctic Seal must not be diluted.
As soon as weather conditions permit, the area must be professionally waterproofed using a system with a fleece lining.
To do this:
- Remove Arctic Seal mechanically, or
- if this is not possible: roughen the surface thoroughly so that the fibres are exposed
Only then may the permanent waterproofing be applied.
Direct re-coating without preparation is not permitted and compromises adhesion.
Versatile –
also available as a handy cartridge
Arctic Seal is available not only in the standard 3.6 kg container, but also as a handy 330 g PE cartridge – ideal for spot repairs, small areas or hard-to-reach places. Simply unscrew, apply, waterproofing – no preparation or additional accessories required.
Arctic Seal is a truly all-in-one product:
- single-component and ready to use
- no mixing, no fleece, no Primer
- ready for immediate application – even in frost or damp conditions
Whether from the container or the cartridge – Arctic Seal is always ready for use when quick help is needed.
Any questions?
We’re always happy to help!
Anyone working with liquid plastics has to consider many details – but uncertainty is not one of them. Because at Enke, we not only provide the right system, but also expert support. Whether you need technical advice, project consultancy or help with a specific application – we’re here for you, we think alongside you and we’re here to help. Direct, reliable and solution-focused.
You can reach us by phone or email:
+49 (0) 2173 8956840
technik@enke-werk.de